Draining water is important in any kind of roof. This is to prevent problems like standing or pooling water, leaks, cracks, etc. Flat roofs, unlike other roofs, do not have the luxury and capacity to drain water by themselves.
If so, how then do flat roofs drain rainwater and precipitation? Although flat roofs are popularly known for the pooling water problem, they have a system that drains water. This system is called a drainage system.
When a flat roof is being installed, a drainage system is installed along with it so it can drain the water on your flat roof.
Most times, the reason flat roofs develop pooling water problems is that the drainage system developed a problem that affected the flow of water.
There are 3 types of drainage systems namely:
Although interior drains are usually found on large buildings, it is also used and suitable for residential buildings. It makes use of pipes and other interior systems to drain water from your roof.
The pipes are usually placed under your roof; precisely, at the center of your roof. Using this system has a high guarantee because the pipes don't break easily. Its aesthetics also serves as a good curb appeal for your building.
This is arguably one of the most used drainage systems in the flat roofing system. It is also effective for a pitched roofing system. It uses drain pipes or downspouts to divert water from your roof.
After diverting the water, it drains it through the pipes, then the pipes pass it to the ground. It is cost-effective, easy to install, and easy to use. But it has a problem: it needs regular maintenance. As mentioned earlier, one of the primary reasons for pooling water is a faulty drainage system.
Now, if gutters are not properly maintained, the pipes tend to get blocked by leaves, chunks of trees, etc, which affect the flow of water. And when the pipes are blocked, the water won't flow freely, which means the water will stay on the roof.
However, with proper maintenance, gutters are one of the most less expensive and effective drainage systems.
This is a big square opening in the outer walls that is usually along your roofing line. The openings enable the flow of water from the side of your building.
It can be installed alone or installed with drain pipes. Installing alone is usually more effective than drain pipes due to the backlogs of drain pipes. But drain pipes usually add to the aesthetics of your building. Without drain pipes, it is easy to maintain and cost-effective. But with drain pipes, you will face the same problems you have with gutters.
In conclusion, unlike other roofing systems that drain water, flat roofs drain water through drainage systems. To get more information about the best drainage system for your building, you should contact a professional local roofer in your area. Or contact Royal Roofing and siding long island at 70 Sunrise Highway #500 Valley Stream, New York 11581, 516-252-3001
It’s much easier to get confused when selecting the right roofing material for your flat roof. But by understanding everything there is to know about the nature of the material, the pros, and the cons, it will be much effortless for you to make the best decision.
TPO has become one of the famous flat roofing materials, thanks to its numerous benefits. However, as nothing is ever perfect, TPO has some drawbacks. When it’s time to replace your flat roof, what is the best flat roofing material to go for? Is TPO really the best material for your home?
Thermoplastic Polyolefin, or TPO for short, is a unique single-ply roofing membrane that comprises a mixture of plastic and rubber. Combining these materials (plastic and rubber) gives an energy-efficient flat roofing system.
In recent times, TPO has risen to be one of the top commercial and even residential flat roofing materials of choice among homeowners, thanks in part to its remarkable degree of energy efficiency. According to the National Roofing Contractors Association (NRCA), TPO has a naturally reflective surface, making it one of the best flat roofing materials for reflecting UV rays.
While the cost varies, it will take about $3 to $7 per square foot, both in materials and labor, to successfully install a TPO roofing system.
Cost is one of the things you have to consider before embarking on any building project. For a TPO system, it costs less to install and maintain compared to other single-ply membrane roofing systems.
The TPO roofing system is the top choice for most homeowners and property managers because of its energy-saving nature. TPO coatings are mostly white, which means they can easily reflect UV rays, thereby lowering your utility bills.
If you’ve got your eyes fixed in the long run, you’ll discover that TPO is easily the smart choice for you. As this type of single-ply membrane roofing comes laminated, you need not worry about the growth of weeds or algae on your rooftop.
Like most other single-ply membrane roofing, TPO roofing allows you to choose from a vast range of alternatives to insulate your building.
TPO offers many choices on how you want it to be installed. You can opt to install it by attaching adhesives or fastening it directly to your roof deck or by heat welding.
Although TPO is inexpensive, with different products available in the market, it will be hard for you to get quality material, except if you’re an expert.
As there are several and different TPO products out there, so is their thickness. However, you should know that the thickness of the material is never a guarantee of quality.
TPO materials are usually laminated. One problem with this is that it introduces weak points that could lead to cracks, leaks, and deterioration over time.
TPO flat roofing materials are a great choice for commercial buildings. However, installing a TPO roofing membrane and repairs will always require the expertise of a professional flat roofer.
Get your TPO flat roofing system today. Reach out to Royal Roofing & Siding Long Island 70 Sunrise Highway #500 Valley Stream, New York 11581 (516) 252-3001, https://www.gafroofinglongisland.com/.
Practically all roofers will request for a down payment to cover the materials needed upfront. Several unprofessional contractors though will be asking for the full payment upfront. Be wary as there is no shortage of reports from angry homeowners who paid everything upfront only to have the roofer run off soon after.
Even if a roofer has no intention of running off with your cash, an upfront payment removes their motivation to complete the exterior project. Should a contractor ever request for full payment from the beginning, regardless of their reasoning, you should never oblige complete payment without any work even being done.
Lots of states require roofers to have a general contractor’s license and must also be bonded and insured. Contractors without licenses cannot legally offer their services. Exterior contractors that aren’t bonded and insured aren’t legally liable for compensating you for damages, stolen property, or injuries that occur during their roofing work. In our area, the big contractors will sport their license numbers all over their trucks. Most legit services have followed suit and now do the same.
Manufacturer’s warranties makes sure that the quality of materials used on your roof repairs in Long Island are reliable and of good quality. A contractor’s warranty on the other hand insures the quality of the contractor’s workmanship. There is a difference. When considering roofers, make sure you get both kinds of warranties. All reliable servicemen will have no qualms with both types of warranties.
The best way to gauge the quality and skills of a prospective GAF roofing contractor is to talk with the people who’ve seen their work firsthand; their past customers. The best exterior contractors with a history of quality work should have no issues with providing references that can satisfy their potential customer’s curiosity regarding their qualifications.
Companies with poor work records are more reluctant to provide references. If a prospective contractor gives out excuses for not giving numbers of references, it might be best to look for a different contractor.
Might seem obvious at first but there are actually more roofers operating out of their homes and do not have a permanent location of business. Home improvement services with an established customer base always have a good location nearby their target demographic. Whenever a contractor does not have a permanent location, it is easier for them to move to a different location should they so choose.
In conclusion, if you are looking for roofers that will make you feel like kings & Queens and can give you your money’s worth and put your roof back in good condition, make sure they have all the aforementioned qualities. It might take some extra time and effort, but improved chances of not wasting your money is worth it.
If you need service we invite you to reach out to our Featured 2017 GAF Master Elite Roofer Royal Renovators:
The Royal team can be reached or visited at the following 3 convenient locations.
Royal Renovators Inc. 118-35 Queens Blvd Forest Hills, NY 11375 (800) 423-2313 http://www.nycrenovators.com
or...
Royal Roofing Queens 68-38 Main St #2, Flushing, NY 11367 (718) 489-4009 http://www.kingsqueensroofing.com
or...
Royal Roofing & Siding Long Island 70 Sunrise Hwy #500, Valley Stream, NY 11581 (516) 252-3001
